Sarabium Coffins - A Mystery That Baffles Earth Scientists

 Sarabium Coffins - A Mystery That Baffles Earth Scientists

The Temple of Sarabium is located in the area of Saqqara monuments and there is a saqqara in the city of Badrshin and is about 30 km away from the Giza Pyramids area
The temple has 26 huge granite coffins made of...
The coffin cover weighs 30 tons !!!
The body of the coffin itself is 70 tons !!!!
That is, each coffin is close to 100 tons!!!!
Why did you make these coffins...?
And to who?
Why are the coffins all empty and closed except for only one coffin?
Why were no mummy or body of the body of the calf, As was claimed by August Marit, the tomb !!!!?
Who made it and how. And why was it made? And why is it so big...?
Then, in the end, how did they move her into the corridors and tunnels of the mirage !!!?
If the Pyramids of Giza are the largest and greatest monuments, the sarabium is the most confusing and confusing effect in the world !!!!
The sarabium catacombs themselves are a complex mystery, in the summer you find it cold, and in the warm winter, the tunnels are 400 meters long etched in the heart of the rock of the Saqqara plateau and not in the middle of the sand and the tunnel descends on a runway ladder, and if you look at the map of tunnels below you will find many variations. In the main tunnel at those spaces shown in the map are the boxes,
If we look at the main corridor, we find it on one straight. Could this long tunnel be dug only by shovels?
The serium tunnels have only one door that is considered the entrance and the exit, and the vision inside the tunnels even with the sun so dark, complete darkness, did they dig all that distance in that depth in the darkness and take out tons of tons of firelights?
It is also strange that there is no trace of torchpositions on the walls of the tunnel, and any flares at that depth with rubble and dust will be suffocating. Can we say that sarabium is in itself proof that there was electricity in ancient Egypt!!!!?
Look at the rotation and integrity of the tunnel, can a human hand dig a tunnel so accurately and straighty at this distance, or can this be impossible without a drilling machine?
The tunnels are not etched in the sand, but they are etched in saqqara rocks, which certainly requires an incredible effort to be done through the human hand alone, but they are powerful and advanced machines that have accomplished this work. If we look at our contemporary civilization, we'll find that to dig a tunnel like this, we're going to need a tunnel-digging machine.
Then you come to the coffins of the same sarabium, which is a scientific and engineering miracle even now!!
These coffins were not built but were carved. Like any coffin, it is 4 sides, a base and a cover. The body of the sarcophagus itself was carved by cutting a solid block of granite of various types of quarries in the south of the country, in Luxor, Aswan and Sudan.
After cutting off that estimated mass of approximately 80 tons of quarry, it is drilled and polished, and then the cover is carved.
The coffins are all made of high-steel rocks (red granite, black granite, basalt, quartz) and can only be handled by diamond cutters !!!
It is inconceivable that no one would say that they were carved with tools that were used in the era of dynasties, respectively (stones, copper, bronze, then iron in the late ages) all of which can never be dealt with by these tools, as well as polished in this way !!!
The hole in the box itself is baffling, so how did they do it?
There is no doubt that hoes and rudimentary road machines cannot produce such a unique geometric product, as all the inner and outer corners of the box are 90 degrees complete, not 90.1 nor 89.9.
Flatness is also a flatness coefficient with a error rate of less than 0.02%, a degree that can only be attained in modern times using high-precision machines, or optical optical technology such as lasers, for total flatness.
The box itself is so polished that your mind looks, but there are advanced machines that have been drilled and polished in this precise form.
Then he got to the most important question... How were those giant coffins placed inside the tunnel, which has one very narrow entrance !!!!
The amazing information that King "Farouk" tried to get one of the coffins out of the tunnel and used a lot of workers and mules and could not move him from his place only a few meters and left in his place until now !!!!